Assembly Instructions - Skil TS6307-00 Manual Del Propietário

Specifications
Rated Input
No Load Speed (RPM)
Blade Size
Arbor
Bevel angle range
Cutting Depth at 90°
Cutting Depth at 45°
Max . Dado Cutting Width
Max . Rip Length To Right
Of Blade
Max . Rip Length To Left Of
Blade

ASSEMBLY INSTRUCTIONS

WARNING
of power . This cord must remain unplugged whenever you are assembling or making
adjustments to the table saw with stand.
Model TS6307-00 Table Saw and stand is shipped completely in one carton. To make the
assembly of the stand easier, place the table saw with the table surface towards the ground.
Separate all parts from the packing materials and check each one against the illustration and
the list of Loose Parts to make certain that all items are accounted for before discarding any
packing material (Fig. 2).
WARNING
are obtained and are installed correctly .
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
1 Dust-Chute Elbow
2 Barrier-Guard Assembly
3 Anti-Kickback Device
4 Miter Gauge
5 Push Stick
6 Rip Fence
Drive Knob with Washer
7
and Hex Screw
120 Vac, 60 Hz ,15A
4600/min
10''(254mm)
5/8"
-2° - 47°
3-1/2"
2-1/2"
5/8"
25.5"
14''
To avoid injury from unexpected starting or electrical shock during
unpacking and setting up, do not plug the power cord into a source
If any parts are missing, do not attempt to assemble the table saw,
plug in the power cord or turn the switch on until the missing parts
Fig. 2
QTY.
3
1
1
1
1
1
1
1
1
6
2
4 5 7
15