Milwaukee Allmand NIGHT-LITE PRO II Manual Del Operario página 16

8
C
E
Lifting
Lifting equipment requirements
• Use only approved lifting equipment with a rated
lifting capacity that exceeds the GVWR of the unit.
See Specifications.
WARNING
Unsafe Operation Hazard
Failure to use approved lifting equipment with a rated
lifting capacity that exceeds the GVWR of the unit could
result in death or serious injury. Use only approved lifting
equipment with a rated lifting capacity that exceeds the
GVWR of the unit.
Before lifting
• Be sure the light tower is fully lowered and locked in
the transport position. See Operation - Raising And
Lowering The Light Tower.
WARNING
Rollover Hazard
Failure to lower the light tower before lifting the unit could
result in death or serious injury. Always lower the light
tower before lifting the unit.
Before lifting
• Forklift pockets - (A, Figures 9 and 10) Use forklift
blades at least 60" (152 cm) long when lifting the unit.
Insert the forklift blades fully into the forklift pockets.
• Lifting eye - (B, Figures 9 and 10) Use only shackles
or a locking type hook when using the lifting eye.
16
•
A
B
D
Unsafe Operation Hazard
Failure to use the designated lifting points to lift the
unit could result in death or serious injury. Use only the
designated lifting points to lift the unit.
Unsafe Operation Hazard
Failure to properly lower and lock the tower could result in
death or serious injury. Always be sure to properly lower
and lock the tower before attempting to lift the unit.
Crush Hazard
Standing under or near the unit while it is being lifted
could result in death or serious injury. Never stand under
or near the unit while it is being lifted.
9
On manual (laydown) tower models, the lifting eye
and upper forklift pockets are incorporated into
the light tower assembly. Be sure the light tower is
lowered and locked in the transport position before
lifting the unit.
WARNING
WARNING
WARNING
B
A
www.allmand.com