Denon DCD-980 Instrucciones De Operación página 10

ENGLISH
@ When there are no tracks that can be picked in the blank portion of side
A (side B), cancel the last track of side A {side B), increase the blank
portion, and pick an available track in the new blank portion.
At this time the tracks cancelled from side A are automatically fixed on
side B.
When there are no tracks that can be picked even though the last track
of side A (side B) has been cancelled, the setting will remain the same
even if the cancellation is suspended.
Example of tracks not being placed in the blank spaces
LE! [2 fa] 4] s [6 | 7] pes no
t
enter Before the pick
(1 [2 |sieeilats5 [6 |]
Side A
When tracks are not placed in blank spaces as shown in
the diagram to the right, the last track (track 3 in the
example) is cancelled and substituted with a track from
side B.
(3) Link Function (LINK)
The link function provides the convenience of editing a number of discs in
succession.
The link operation is used following the tape time specification of the time
edit function and before the end of playback.
@ When the link button (LINK) is pressed, will start flashing.
@ After the tracks have been played, the player will stop automatically.
The blank time of the tape will be displayed at this time.
@ Press the open/close button (& OPEN/CLOSE) of the disc holder and
change the disc.
@ Pressing the time edit (TIME EDIT) button will permit editing using the
blank time of the tape in Step @.
( > PLAY)
(4 OPEN/CLOSE):
(LINK)
NOTE:
e The link operation is cancelled by the stop button ( Ml STOP). it
will also be cancelled if the disc holder is opened during play.
When editing has not been performed as far as side B with the
time edit (i.e., only for part of side A), editing will be done within
the blank time of side A and the blank time of side B.
When editing has been performed as far as side B with the time
edit, the blank time of side B will be used for editing.
® Fading Out or Fading In at the
Desired Location .............ssssscsssssssserssssssrssaserssesesessecs
{Analog output only)
(1)
Fading out and fading in is possible at the desired position during
play Manual Fader
@ Fade Out
When the fader button (FADER) is pressed during play, fade out will be
provided for about 5 seconds. (**°* will light up during the operation
and ( )
will flash. When fade out is completed the player will
automatically pause.
@ Fade In
10
Side B 1
Blank space
Enters After the pick
(2) Setting the Fade Out Time in Advance (TIME FADE)
@® Input the fade out time with the (0~9) number buttons.
The time fade function will be cancelled if an auto search or manual
search is performed during playback.
( > PLAY)
(Number buttons)
(FADER)
® To Search for the Peak Level
(PEAK SEARCH)