Periodic Inspection - TOHATSU M 9.9D2 Manual Del Propietário

Ocultar thumbs Ver también para M 9.9D2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENOM01106-0

2. Periodic Inspection

It is important to inspect and maintain your outboard motor regularly. At each interval on
the chart below, be sure to perform the indicated servicing.
Maintenance intervals should be determined according to the number of hours or number
of months, whichever comes first.
Item
Carburetor *1
Fuel filter
Fuel System
Piping/Hose
Fuel tank
Spark plugs
Ignition
Ignition timing *1
Starter motor *1
Starting
Battery
System
Starter rope
Propeller
Lower Unit
Gear oil
Water pump *1
Bolt and Nuts
Sliding and Rotating Parts.
Grease Nipples
Outer Equipment
Anode
*1: Have this handled by your dealer.
ENON00030-0
Note
Your outboard motor should receive careful, and complete inspection at 300 hours. This is the best
time for major maintenance procedures to be carried out.
Servicing Interval
10 hours or
50 hours or
1 month
3 months
INSPECTION AND MAINTENANCE
Every 100
Action
hours or
6 months
Strip, clean and adjust.
Adjust idling.
Check and clean or
Replace.
Check and Replace.
Clean.
Check gaps. Remove
carbon deposits or Replace.
Adjust timing.
Check for salt deposits and
battery cable condition.
Check Installation, fluid
quantity, gravity.
Check for wear or damage.
Check for bend blades,
damage, wear.
Change or replenish-oil and
check for water leaks.
Check for wear or damage.
Retighten.
Apply and pump in grease.
Check for corrosion.
Check for corrosion and
deformation.
57
Remarks
10
Replace impeller
every 12 months.
Replace.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

M 15d2M 18e2

Tabla de contenido