Delete User; Change User; Create User; Mode Bt (Bluetooth) - Tunturi E-80R Recumbent Bike Manual Del Usuario

English
Weight
- Turn jog wheel and select "Weight"
- Press jog wheel to open "Weight" edit
- Turn jog wheel to change Weight
In kg when units in Metric
In lbs when units in Imperial.
- Press jog wheel to confirm and go back to Edit user
Menu
Max HR
- Turn jog wheel and select "Max HR"
- Press jog wheel to open "Max HR" edit
- Turn jog wheel to change default max HR preset as:
when selected Male : 220-age
when selected female
- Press jog wheel to confirm and go back to Edit user
Menu

Delete User

By selecting the "Delete User" you can:
Delete a user and all its data.
- Turn jog wheel and select the user you want to
delete
- Press jog wheel to delete the selected user and go
back to setting menu.
NOTE
• User will be deleted without further prompting

Change user

By selecting the "Change User" you can:
- Select an other pre-set user profile.
- Turn jog wheel and select the user you want to
activate
- Press jog wheel to confirm the selected user and go
back to setting menu.

Create user

By selecting the "Create User" you can set up a new
user profile. Maximum of 8 users can be installed.
See Edit user on how to create user.

Mode BT (Bluetooth)

Rotation the jog wheel button to choose BT Mode ,and
press the button into BT mode.
: 226-age
2 8
BT Connection
The Bluetooth Module will be turned on and connect
BT device automatically when being in this mode.
Press the jog wheel button or back button to leave this
page ,and Bluetooth Module will be turned off.

Cleaning and maintenance

The equipment does not require special maintenance.
The equipment does not require recalibration when
it is assembled, used and serviced according to the
instructions.
WARNING
• Do not use solvents to clean the equipment.
• Clean the equipment with a soft, absorbent cloth
after each use.
• Regularly check that all screws and nuts
are tight.
• If necessary, lubricate the joints.

Defects and malfunctions

Despite continuous quality control, defects and
malfunctions caused by individual parts can occur in the
equipment. In most cases, it will be sufficient to replace
the defective part.
- If the equipment does not function properly,
immediately contact the dealer.
- Provide the model number and the serial number of
the equipment to the dealer. State the nature of the
problem, conditions of use and purchase date.

Transport and storage

WARNING
• Carry and move the equipment with at least two
persons.
• Remain standing in front of the equipment
on each side and take a sturdy grip at the
handlebars. Tilt the front of the equipment
so as to lift the rear of the equipment on the
wheels. Move the equipment and carefully put
the equipment down. Place the equipment on a
protective base to prevent damage to the floor
surface.
• Move the equipment carefully over uneven
surfaces. Do not move the equipment upstairs
using the wheels, but carry the equipment by the
handlebars.