Own Trainings; Fitness Test - Tunturi E-80R Recumbent Bike Manual Del Usuario

- Watt control: Rolling Hills - Hill Climb - Cross
Country - Stamina - Power Interval items and,
Heart Rate Control: Fat burner 1 - Fat burner 2 -
Cardio Strength -
Cardio Climb - Cardio Interval
- Press the jog wheel to confirm and enter the Setting
screen (2) (Fig. F-17)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and
continue the range setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the
Workout screen. (Fig F-18)
- Turn jog wheel to select item
- Press the jog wheel button for confirmation and
continue the range setting at the right.
- Turn jog wheel to change setting ranges
- Press the jog wheel button to confirm and enter the
Workout screen.
NOTE
Workout screen:
Workout screen is depending on the trainings mode
you are in.
Nm manual mode
It's the same as Manual mode
Watt Constant Mode
Its' the same as Preset programs Watt Mode
Target HR Mode
It's the same as Preset programs Heart Rate Mode
To stop your workout see: "End your workout"

Own Trainings

- Turn the jog wheel and select
"Own trainings"
- Press the jog wheel to confirm and enter the Setting
screen (1). (Fig. F-20)
NOTE
• When no saved trainings are found (fig. F-19)
window will appear.
• Press jog wheel to go back to main menu.
Setting Screen (1) is for user's saved items and training
records.
They are shown in the right and left screen.
- Turn jog wheel to select item
- Press the jog wheel button to confirm and to open
selection window. (Fig. F-21)
- Turn the jog wheel and select item (Fig. F-22)
Choose "Replay"
- Press jog wheel button to confirm.
Enter workout screen and continue the previous
training
Choose "Edit"
- Press jog wheel to confirm
- Enter and edit the range setting
- Press jog wheel button to confirm and to enter
workout screen
Choose "Delete"
- Turn jog wheel to select item
- Press the jog wheel button to confirm and to open
selection window.
- Choose Yes to delete selected file, choose no not
delete selected file. (Fig. F23)
- Press jog wheel button to confirm.

Fitness test

- Turn the jog wheel and select
"Fitness test"
- Press the jog wheel to confirm and enter the Setting
screen (1).
NOTE
• User interface needs the user's data to process
Fitness test, if no any user data available Fitness
test cannot start up. ( Fig. F-24)
• Press jog wheel to go back to main menu
- Turn jog wheel to select item
- (Inactive / Active / Athletic mode) (Fig. F-25)
- Press the jog wheel button to confirm and to open
setting screen (2) (Fig F-26)
- Turn jog wheel set up user's target heart rate within
Vo2 Max value.
(The range is between 68~220bpm.)
default: 85% of Max HR and shows user's Max HR
(bpm) and weight (kg)
- Press the jog wheel button to confirm and to open
information window (Fig. F-27)
- Press the jog wheel button to confirm and to open
Workout screen.
Workout screen:
It's the same as Preset programs Heart Rate Mode.
The screen shows
"Test Failed ! if:
- The workout time is too short
- RPM value is too low
- HR target is not reached
- HR is less than 110 bpm
"No Heart Rate detected"if:
- It doesn't detect the user's heart rate
Press Back/stop or Main menu button to leave the
workout screen
2 5
English