Champion Global Power Equipment 100304 Manual De Instalación página 35

HOME STANDBY GENERATOR- ALL aXis CONTROLLER
or exhibit a glaze, which can create a resistance to the flow
of electricity. This can occur when the HSB is not exercised or
ran over long periods of storage.
CONNECTORS
1
Slotted potentiometer is factory set to the correct voltage and
should not require adjustment.
Engine Relay Module
14-kW (MODEL 100515)
This module is the interface between the Engine Controller, ATS
Controller, alternator, hour meter and battery charger. It is the
interface for all on board communications in the HSB.
100417
MODELS
®
AVR
3
2
H 102
22-kW (MODEL 100304)
The module has two (2) fuses built into the board.
1. A 250VAC 5A mini fuse protecting the system from an over
voltage between the alternator and the relays. Remove
plastic FUSE cover to access.
100417
2. An automotive style fuse, 40A (Orange), which protects the
system from an excessive transfer voltage output when
the ATS relays transfer between utility and generator and
generator to utility modes. Remove plastic FUSE cover to
access.
100417
TOP ROW
There are 12 wire land points in the top row, the connection points
are all the same size.
The following are the wire land points, function and wire color, left
to right.
Wire Land
Points
100417
Position #1 Frequency
Position #2 Frequency
Position #3 Not connected
35
INSTALLATION
Function Wire Color
R (Red)
B (BLACK)
Empty