Tripp-Lite PINV300SW-120 Manual Del Usuario página 14

Mounting
Remote Control Mounting Instructions
1. To mount the remote to a permanent location, ensure the 20 ft.
(6 m) remote cable can reach the inverter's RJ12 remote port.
2. The following mounting dimensions* should be used when
installing the remote to a permanent mounting location:
*All mounting dimensions are accurate to +/- 0.1 inch (2.5 mm).
1.96 in. (50 mm)
0.07 - Ø 0.11 in.
(2 - Ø3 mm)
2.36 in. (60 mm)
14
0.98 in.
(25 mm)
0.86 in.
(22 mm)