Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting
3. Using the center-to-center spacing of the mounting holes, mark the
locations for installation.
4. Secure the remote to its permanent location with user-supplied
hardware. Tighten by hand to reduce the possibility of cracking the
remote module at its mounting points.
5. Connect the remote's wired connector to the inverter's RJ12 port
labeled "REMOTE".
6. Set the inverter's main power switch to the OFF position.
7. Test the connection and operation by pressing ON/OFF until the
green status LED shows on the remote module.
15
Publicidad
