Publicidad
Idiomas disponibles
Idiomas disponibles
Feature Identification
A
AC Outlets: NEMA 5-15R outlets allow you to connect
equipment that normally plugs into an AC utility outlet.
B
LED Status Indicators: When the switch is set to the ON
position, the power status LED will illuminate green during normal
operation and along side the fault conditions. The Fault LED will
illuminate red when certain fault conditions occur.
Function
Input under-voltage alarm
Input under-voltage shutdown
Input over-voltage shutdown
Overload shutdown
Output short-circuit
* The internal audible alarm activates for all alarm and fault conditions.
C
ON/OFF Switch: When you set the switch to the ON position,
the Inverter provides AC power by converting DC power from the
connected 12V battery system. Set the switch to the OFF position
to shut down the Inverter and conserve the battery's charge when
you are not using connected equipment. Also, set the switch to
the OFF position to reset the Inverter if it has shut down due to
overload or other critical events. Select models include a wired
REMOTE port to extend ON/OFF control to a remote location with
the included PINVSWRM remote panel. The remote provides
ON/OFF control and operation status LEDs to let you know the
inverter is ON and working correctly or not. See the Operation
section for more information.
D
USB Charging Ports: 5V DC 2.1A USB-A and 5V 3A / 9V 2A /
12V 1.5A (18W Max) USB-C charging ports support smartphones,
tablets, telematics and other electronic devices.
Fault (Red)*
Off
On
On
On
On
7
LED
Power (Green)
On
On
On
On
On
Publicidad
