Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting/Maintenance
Condition
Explanation
The thermal resistor exceeds
Over-
176° F (80° C).
Temperature
Resetting the
inverter
Output Short-Circuit
Explanation:
A connected device has a short circuit at output which will cause the
unit to shut down immediately.
Solution:
Remove the connected loads and check for issues. Check all
connections. Restart the inverter.
Solution
Allow the inverter to cool. Do
not block the cooling slots
or airflow over and through
the inverter. The inverter
will automatically resume
operation after internal
temperature goes down to
140°F+/-41°F (60°C+/-5°C).
To reset after shutdown
occurs, switch the inverter's
ON/OFF switch to the OFF (O)
position. Check the source
of the problem and correct.
Switch the inverter's ON/OFF
switch to the ON position (this
can also be done using the
wired remote).
24
Publicidad
