Pull Cart; Operating Zen-O; Connecting Nasal Cannula - GCE Zen-O RS-00500 Manual De Usuario

Contact your distributor for updated information
and accessories or if additional, optional, or re-
placement accessories are needed.

6.4. Pull Cart

When using the device with a pull cart, attach
and secure the concentrator with the straps as
shown in Fig. 4.
EN
IMPORTANT: It is recommended that patients use
the pull cart to transport the device whenever pos-
sible.

Operating Zen-O™

7 .
IMPORTANT: Read Chapter 3 - Safety Instructions
before using this device.
Zen-O™ Portable Oxygen Concentrator is de-
signed for ease of use, with all functions accessed
through just a few buttons on the control panel.
The device should be carried in its carry bag,
placed on a cart and used when positioned up-
right on a table or on the floor while in the carry
bag. The patient should be within the recom-
mended cannula length during use.
IMPORTANT: Except during startup and shutdown
sequences, the backlight on the display screen will
remain off. Pressing any button will turn the back-
light on briefly. The backlight will also remain acti-
vated during an un-muted alarm condition.

7.1. Connecting Nasal Cannula

CAUTION: Replace the cannula on a regular ba-
sis. Check with your home oxygen provider or
clinician to determine how often the cannula
should be replaced.
CAUTION: Always follow cannula manufacturer's instructions for proper use.
Connect the tubing to the cannula port as shown in Fig. 5.
14/292
Fig. 4
Cannula
port
Fig. 5