Publicidad
Idiomas disponibles
Idiomas disponibles
AOCS3040
installed
below AKGD3060
gas
downdraft
cooktop
in an island installation
Illustration shows dimensions for venting behind, and to
the left side of the wall oven. Left side venting for wider
island applications only. Junction box and 10%"x 33/8 ''
vent location for 10"x 3V4"vent indicated in black.. Cutout
bottom indicated in grey.
Centerline of
top cutout
WARNING
To avoid property damage or personal injury,
information in these installation specifications must be
followed exactly.
A--6"
right of junction box location
B--4V2" from top of countertop
C-- 24" from floor of cutout
D--2%"
right of centerline from right edge of vent
E-- 6" from back of cooktop cutout to back of vent cutout
F-- 3V2" minimum from back wall of island cabinet to
back wall of wall oven
G--28" minimum island depth
H---23V2" bottom of wall oven in cutout
#-- 28V2" wall oven cutout width
J-- 27V4" wall oven cutout height
K-- 3V2" minimum from side wall of island to side wall of
wall oven
L-- 277/8'' cooktop cutout width
M--20%"
cooktop cutout depth
N---4V2" from top of countertop to top of wall oven cutout
O--3/4 '' from back of cooktop cutout to center of gas
entry into cooktop
P--43/4 '' from right of cooktop coutout to center of gas
entry into cooktop
Shaded ares
represents
bottom of
wall oven
///
entry
into cooktop_
G
box
location
10
Publicidad
