Publicidad
Idiomas disponibles
Idiomas disponibles
h)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
i)
The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
j)
It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
k)
Keep the device away from sources of fire and heat.
l)
Do not short live leads.
m) Do not place the device close to combustible materials.
n)
Some parts of the device may get hot. Be careful when touching the device, as this may result in burns.
o)
Replace the fuse only with the same type as the original.
p)
Before replacing a blown fuse, make sure that the cause of blowing has been eliminated.
q)
Unplug the power cord before replacing the fuse.
r)
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The device is designed for measurements, voltage adjustment, short-circuit simulation, static and dynamic
testing of power supplies, batteries, DC - DC converters and battery chargers.
The user is liable for any damage resulting from unintended use of the device.
3.1.
Device description / Device use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
Main interface:
Publicidad
