STAMOS S-LS-118 Manual De Instrucciones página 38

3.10. Setting of Parameter Function
Select
Baudrate(F1)
Select
UsbStore(F2)
Select Voltage(F3)
Select UP(F4)
Select DOWN(F5)
Save Exit(F6)
3.10.1. Setting of communication interface
1) Setting of serial baud rate
Select TAB or (Fl) SelBaudrate to tum the knob
(1) Setting of IP address
ESC on the keyboard is the delete key, and numeric O to 9 is for entering numbers.
(2) Setting of port number
ESC on the keyboard is the delete key, and numeric O to 9 is for entering numbers. The maximum port
number is 65535, and the minimum port number is 1000. The value 18191 can not be set.
3.10.2. Setting of CC siope rate
Press TAB to switch to CC SLOPE and turn the knob to select LOW/HIGH.
3.10.3. Storage time setting of USB flash disk
Press TAB to switch to Sel UsbStore. ESC is the delete key, and numeric 0 to 9 is for entering numbers. The
minimum storage time can only be 0.05S, and the maximum storage time is 9999S;
3.10.4. Buzzer setting
Press TAB to switch to BEEP and turn the knob to select ON/OFF.
Fig. 10.1 Parameter Setting
Select the parameter of baud rate
Switch focus to select USB sto re
Switch the Max setting of focus voltage
Switch the focus up
Switch the focus down
Save and exit