Publicidad
Idiomas disponibles
Idiomas disponibles
Auto Power Off
When the rotary switch is in the
meter for about 30 minutes (1 hour in the Recording mode) while the input voltage is less than 1V.
When the rotary switch is in other position, the meter will turn off automatically if you have not operated the
meter for about 30 minutes (1 hour in the Recording mode).
About 30 seconds before the meter turns off automatically, the symbol " " will start flashing to remind you
that the meter will turn off.
To turn on the meter again, set the rotary switch to OFF position first and then set it to a desired position.
To disable the automatic power-off feature, turn on the meter while holding down the "HOLD" button.
Using Inductive Pickup
The meter comes with an Inductive Pickup. The Inductive Pickup takes the magnetic field generated by the
current in the spark plug wire and converts it to a pulse that triggers the meter's RPM measurement.
4.
UNDERSTANDING THE DISPLAY
15
16
17
18
19
20
21
22
23
14
All manuals and user guides at all-guides.com
position, the meter will turn off automatically if you have not operated the
14
13
12
11
10
9
8
24
7
6
5
4
3
2
1
26
25
MACTOOLS.COM
Publicidad
