MAC TOOLS EM721 Manual Del Usuario página 79

When a series of hexadecimal codes appear on the blank area of the Serial-Port Debug Assistant interface, the
display area on the upper left area of the M721-PC interface will show readings of the meter in almost a
realtime mode. Close the Serial-Port Debug Assistant interface by clicking the "
corner of the Serial-Port Debug Assistant interface. Now the meter has been successfully connected to the PC.
(Clicking the "Close" button on the Serial-Port Debug Assistant interface will stop the data transfer from the
meter to the PC.)
The eight buttons on the left half of the EM721-PC interface correspond to the buttons on the meter,
respectively. You can use these buttons of the interface in the same way you use the buttons on the meter, but
the "REL" button on the interface can not be used to turn on or off the USB communication function of the
meter. To turn on or off the USB communication function of the meter, press and hold down the "REL" button
on the meter for 1 sec. In addition, the rotary switch on the left half of the interface is not functional and can
not be used.
This rotary switch is not functional.
800.MACTOOLS
All manuals and user guides at all-guides.com
Readings transferred from the meter
appear in the table here.
" button at the top right
79