MAC TOOLS EM721 Manual Del Usuario página 77

13. METER-PC COMMUNICATION SOFTWARE INSTRUCTION
Place the supplied CD on the tray of the CD-ROM drive of your PC and close it. Locate the "EM721.exe" file in
the "EM721-PC" folder on the CD, and double-click this file to run this communication software. Connect the
supplied USB data line to the USB port on the top of the meter, and connect the other end of this USB data
line to a USB port on your PC. Turn on the meter. Then press and hold down the "REL" button on the meter
for about 1 second to turn on the USB communication function; "
indication. (NOTE: After you finish using the USB communication function, turn off this function to save battery
power by pressing and holding down this "REL" button for about 1 second.)
Run the communication software, the following EM721-PC interface will appear:
Buttons
Click the "COMSETTING" button, the Serial-Port Debug Assistant interface will appear.
800.MACTOOLS
All manuals and user guides at all-guides.com
Readings transferred from the
meter will appear here.
" will appear on the meter screen as an
77