Hilti PT-C Manual De Instrucciones Original página 42

Distance
5 m
7 Functions
7.1 Adjusting coloration
Depending on the measuring situation, different color palettes can facilitate analysis of the thermal image and
render objects or circumstances clearer in the display. This does not influence the measured temperatures.
The only change is to the way in which the temperature values are visualized.
To change the color palette, stay in the measuring mode and press the Right button or the Left button.
7.2 Superimposition of thermal image and real image
For better orientation (= localization of a displayed thermal image in space), a visual real image can be
superimposed if the temperature ranges are balanced.
The superimposition of real image and thermal image is an exact overlay at a distance of 0.55 m
(21.7 in). On account of the principle employed, at distances other than this there is some offset
between real image and thermal image of the object to be measured.
The measuring tool offers you the following possibilities:
• 100 % infrared image
Only the thermal image is displayed.
Image in image
•
The thermal image displayed is cropped and the surrounding area is shown as a real image. This setting
improves localization of the measured area.
36 English
Size, infrared pixel
16 mm
Infrared area width x height
3.64 m x 2.68 m
2356162
*2356162*