Fronius Selectiva 4.0 Serie Manual De Instrucciones página 19

Danger if the active charging process is interrupted by disconnecting the char-
ging plug.
This can result in severe personal injury and damage to property.
▶
▶
Correct routing
of the mains/
charging cables
Danger due to charging cables lying around.
This can result in severe personal injury and damage to property. Personnel can
get caught or trip on unplugged, loose cables.
▶
Danger due to overheating as a result of incorrectly laid mains/charging cables.
Risk of damage to the mains/charging cables.
▶
▶
▶
▶
▶
▶
WARNING!
Stop the charging process by pressing the "Stop/Start" key before discon-
necting the charging plug.
When charging is complete, wind up the charging cables or place them on
the cable holder, if available.
WARNING!
Lay charging cables so that no one can trip over them or get caught on them.
CAUTION!
The mains/charging cable may only be replaced by a qualified electrician.
Lay the mains/charging cable without a loop.
Do not cover the mains/charging cable.
Charging cables longer than 16 ft. 4.85 in. (5 m) must be laid individually (no
bundling).
Charging cables longer than 16 ft. 4.85 in. (5 m) can have an increased sur-
face temperature (be aware of hot surfaces).
In the following cases, pay special attention that the surface temperature of
the charging cables does not exceed 176°F (80°C):
- Ambient temperature is 86°F (30°C) or more
19