Fronius Selectiva 4.0 Serie Manual De Instrucciones página 13

Safety rules - required for Canada
General and
1
electrical risks
2
3
4
5
6
Minimum AWG size of an extension cable for the mains connection
2160 UL
25 ft (7.6 m) AWG 14
50 ft (15.2 m) AWG 14
75 ft (22.9 m) AWG 14
100 ft (30.5 m) AWG 14
125 ft (38.1 m) AWG 14
150 ft (45.7 m) AWG 14
Minimum AWG size of an extension cable for the mains connection
4120 UL
25 ft (7.6 m) AWG 12
50 ft (15.2 m) AWG 12
75 ft (22.9 m) AWG 12
100 ft (30.5 m) AWG 12
125 ft (38.1 m) AWG 12
150 ft (45.7 m) AWG 12
7
8
9
KEEP THESE INSTRUCTIONS CAREFULLY - This guide contains important
safety and operating instructions for these charger types (for model, see first
page of this document).
Do not expose the charger to rain or snow.
The use of accessories not sold or recommended by the charger manufac-
turer can lead to fire, electric shock or personal injury.
To reduce the risk of damage to plugs and cables, always unplug the charger
by pulling at the plug rather than the cable.
Use of an adapter is not allowed in Canada. If a grounding type receptacle is
not available, do not use this appliance until the proper outlet is installed by
a qualified electrician.
Only use an extension cable if it is absolutely necessary. The use of an incor-
rect extension cable can lead to fire and electric shock. If an extension cable
must be used, make sure that
- the pins of the extension cable plug are of the same number, size and
shape as those of the charger plug
- the extension cable is correctly wired and in perfect electrical condition
- the cable cross-section is large enough for the AC current value of the
charger, as indicated above
2225 UL
AWG 12
AWG 12
AWG 12
AWG 12
AWG 12
AWG 12
4185 UL
AWG 12
AWG 12
AWG 12
AWG 12
AWG 12
AWG 12
Do not use the charger with a damaged cable or plug - replace the cable or
plug immediately.
Do not use the charger if it has been subjected to heavy impact, dropped or
otherwise damaged; hand it over to a qualified service technician.
Do not dismantle the charger; hand it over to a qualified service technician if
maintenance or repair is required. Incorrect reassembly can result in fire and
electric shock.
4075 UL 4090 UL
AWG 14 AWG 14
AWG 14 AWG 14
AWG 14 AWG 14
AWG 14 AWG 14
AWG 14 AWG 14
AWG 14 AWG 14
4210 UL 4300 UL
AWG 8 AWG 8
AWG 8 AWG 8
AWG 8 AWG 8
AWG 8 AWG 8
AWG 8 AWG 8
AWG 8 AWG 8
4325 UL
AWG 8
AWG 8
AWG 8
AWG 8
AWG 8
AWG 8
13