Fronius Selectiva 4.0 Serie Manual De Instrucciones página 43

Display
Overview of dis-
No.
play modes
As long as a battery is connected to the battery charger, the charging process
can only be interrupted and resumed by pressing the "Pause/Start" button. It is
only possible to change the display modes with the "Menu" button after discon-
necting the battery from the battery charger. A detailed description of the dis-
play modes is given in the following chapter.
A limited menu selection is available while charging has been paused.
NOTE!
A limited menu selection is available while charging has been paused.
Menu selection
Switch to the menu selection from standard mode as follows:
1
Switch to the menu selection from the other modes as follows:
1
Open the desired mode:
2
Function
Standard mode
In standard mode, the display shows the charging parameters.
Statistics mode
Visualizes the frequency of the operating states of the device and
shows the total number of charges, as well as an overview of the abso-
lute and average Ah delivered and energy consumed per charge.
History mode
Provides information regarding the parameters of all stored charging
processes.
Configuration mode
Configuration mode enables all settings to be made for the device and
the charging process.
USB mode
USB mode supports a device update, the backup and uploading of
device configurations, as well as logging of charging parameters during
the charging process via USB thumb drive.
Press and hold the "Menu" button for approx. 5 seconds.
Press the "Menu" button briefly.
Use the "Up/Down" buttons to select the symbol for the desired mode.
- e.g. the battery symbol for standard mode
43