Fronius Selectiva 4.0 Serie Manual De Instrucciones página 54

Charging settings in configuration mode
Overview of Below is a detailed explanation of the "Settings" menu item, selected under the
charging set- aforementioned "Charging settings" menu item. Navigation is carried out as de-
tings scribed in the
A list appears with the following selection options:
The individual selection options are explained in detail below.
Electrolyte cir-
culation
The following settings are available for the electrolyte circulation:
Off
-
Continuous
-
Program 1 to 5
-
Automatic
-
User "On"/"Off"
-
-
Factory-set programs for the electrolyte circulation and the relevant parameters
are shown in the table below:
54
Configuration mode
Electrolyte circulation switched off.
Electrolyte circulation constantly switched on.
Factory-set programs for the electrolyte circulation and their relevant para-
meters can be found in the table in the "Settings" section of the "Display"
chapter.
Automatic adjustment of the flow rate of the electrolyte circulation based on
the set battery parameters.
Individual setting for the electrolyte circulation.
The "On" and "Off" settings determine the pulse/pause ratio of the airflow in-
tervals.
section.
Electrolyte circulation "Air Pump" (not
available with the Selectiva 220 V and
Selectiva UL version):
The sequential control of the electro-
lyte circulation takes place via the bat-
tery charger control unit. Several se-
lection options are available for this
purpose.