Exiting configur-
If one or more relevant settings for the charging process are changed in configur-
ation mode
ation mode, another prompt appears when exiting configuration mode, asking
whether the setting in question should be applied.
The following settings must be confirmed when exiting configuration mode:
-
-
-
-
-
Curve
Battery capacity in Ah (RI curve excluded)
Number of cells
Equalizing charge ON/OFF
CAN protocol
Example:
Change to the curve from 3 - IUI (Pb-
WET) to 6 - RI (Pb-WET).
If the setting is not confirmed, the bat-
tery charger returns to configuration
mode and the setting can be changed
to the desired value.
51