Fronius Selectiva 4.0 Serie Manual De Instrucciones página 50

1
2
3
4
Navigate through the configuration menu and its submenus as follows:
1
2
3
4
5
To exit the current menu:
6
50
Use the "Up/Down" buttons to enter the first digit of the code.
Press the "Menu" button to move to the next digit of the code.
Continue as described above until the complete code is entered.
Confirm entry with the "Pause/Start" button.
Use the "Up/Down" buttons to select the desired menu item.
Press the "Pause/Start" button to confirm the menu item and confirm any
confirmation prompts (e.g., "OK?") again.
If necessary, use the "Up/Down" buttons to make a selection, e.g., "Off/On" or
enter a value.
Press the "Pause/Start" button to confirm the entry.
If the cursor moves to the next setting or digit after confirming, proceed
again as described in points (3) and (4)
Press the "Menu" button to return to the higher-level selection.
A prompt for the code appears.
Enter the required code "1511" as fol-
lows:
The selection of the main menu items
for configuration mode appears.
When selecting a menu item, you may
be prompted to read the Operating In-
structions. Confirm this prompt by
pressing the "Pause/Start" button
again.