GCE EASE II Manual De Instrucciones página 13

10. SPECIFICATION
Demand Valve - Meets the requirements of BS 4272: part 2: 1996
Gas Connection
Gas Supply
Inspiratory Resistance (at 2.8 bar
Supply Pressure)
Expiratory Resistance
Operating Temperature
Storage Temperature
Materials
Weight / Size Envelope
Hose Assembly
Fittings
Pressure
Material
Weight
Size Envelope
NOTE: Values quoted are nominal. The manufacturer reserves the right to change
specifi cations without notice. Spare Parts and Accessories.
11. SPARE PARTS AND ACCESSORIES
11.1. ACCESSORIES PROVIDED WITH EASE II
EASE II O2/N2O demand valve are typically used with a mask, mouthpieces, fi lter, cylinder
thermometer and scavenging adaptor.
EASE II Oxygen demand valves are typically used with a mask, mouthpieces and fi lter.
Accessories, which is marked as disposable, or "single patient use" must not be used
repeatedly.
The GCE medical range of products is constantly being developed and improved. If you require
any information or assistance, please telephone our Customer Services department. Contact is
enclosed on last page of this manual.
11.2. OPTIONAL ACCESSORIES
Those items marked by * are not manufactured by GCE.
• Bag, complete with cylinder cradle,
• Barrel bag blue,
• Cylinder cradle only,
• Disposable mouthpice - (Pack of 5)*,
• Filter single use (Pack of 100)*,
• Single use mask*
• Reusable mask*
Probes by the national standards
Requirement 2.8 to 7.0 bar at >200 L/min
Cracking -0,15 to -0,2 kPa
-0,2 kPa at 10 L/min.
-0,7 kPa at 200 L/min.
Cracking Zero
At fl ow +0,35 kPa at 120 L/min.
-20°C to +60°C when used with oxygen
+5°C to +40°C when used with 50/50 O2/N2O
-30°C to +60°C
Polyacetal; Polycarbonate; silicone rubber; stainless steel
85 g / 50 x 50 x 63 mm
Probes by the national standards.
Working pressure 7 bar,
Burst pressure ≥56bar/23°C and ≥40bar/40°C
PVC, anti-static in accordance with ISO 5359
0.5kg (3m length)
12,7 mm
13/208
EN