GCE EASE II Manual De Instrucciones página 15

Check demand valve is less than 10 years
old
Check hose condition
Check body condition
Check label condition
Check the three recap screws are in place
Check patient port condition
Check exhalation valve fl ap condition
Check inhalation plate (with pin) condition
Check inhalation valve fl ap condition
LEAK CHECKS
Hose to hose fi tting joints (use leak
detection fl uid)
Hose to demand valve body joint (use
leak detection fl uid)
Leak test Demand valve (listening for
leak with patient port and inhalation disc
removed)
OPERATION CHECKS
Test button operation
Tested By:
APPENDIX:
Nr 2: Quick coupling features and connecting / disconnecting procedure
MANUFACTURER:
GCE, s.r.o.
Zizkova 381
583 01 Chotebor
Czech Republic
TICK
TICK
Tel: +420 569 661 111
Fax: +420 569 661 602
http://www.gcegroup.com
© GCE, s.r.o.
15/208
Comments / Action Taken
Comments / Action Taken
Date:
EN