Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
CAREFULLY READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS ON YOUR PRODUCT
AND IN THIS MANUAL. SAVE THIS MANUAL. MAKE SURE ALL USERS ARE FAMILIAR WITH ITS
WARNINGS AND INSTRUCTIONS WHEN USING THE TOOL. Improper operation, maintenance or modification of tools
or equipment could result in serious injury and/or property damage. KEEP this manual near your saw for easy reference and
to instruct others.
If you have any questions or concerns relative to the use of your tool or the contents of this manual, stop using the tool and contact Delta
Power Equipment Corporation Customer Care at 1-800-223-7278.
This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY
and PREVENTING EQUIPMENT PROBLEMS. To help you recognize these important warnings, we use the symbols below. Please read the
manual and pay attention to these sections.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in
property damage.
Some of the following symbols may be used in connection with this product. Please study them and learn their meaning. Proper
interpretation on these symbols will allow you to operate the tool better and safer.
SYMBOL
NAME
Safety Alert
Read Operator's Manual
Eye Protection
No Hands Symbol
Wet Conditions Alert
Pinch Warning
V
Volts
A
Amperes
Hz
Hertz
min
Minutes
~/AC
Alternating Current
ⁿ ₀
No Load Speed
.../min
Per Minute
Lbs
Pounds
Kg
Kilograms
RPM
Revolutions Per Minute
PH:1
Phase 1
Double Insulation
SAFETY SYMBOLS - DEFINITIONS
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's manual before
using this product.
Always wear eye protection with side shields marked to comply with ANSI Z87.1.
Failure to keep your hands away from the blade will result in serious personal injury.
Do not expose to rain or use in damp locations.
Always watch for movement paying extra attention to potential areas where pinching
could occur.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits, etc., per minute
Unit of weight
Unit of weight
Speed of rotation of machine
This is a 1 phase motor
Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-
wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need to be grounded.
DESIGNATION/EXPLANATION
4
Publicidad
