cecotec BOLERO COOLMARKET 4D 490 INOX E Manual De Instrucciones página 78

ENGLISH
The refrigerator
does not work
The refrigerator
takes a long time to
cool down
Vibration
Note:
If none of these situations match your problem, do not attempt to disassemble, or repair
the appliance by yourself. Repairs carried out by unqualified persons may result in injury or
serious malfunctions. Please contact the local store where you made your purchase. The
repair must be carried out by an authorised technician, and you must use only original spare
parts.
7. TECHNICAL SPECIFICATIONS
Product Bolero CoolMarket 4D
490 Inox E
Reference 02455
QR code
78
BOLERO COOLMARKET 4D 490 INOX E/ DARK E/ GLASS E
Defrost mode enabled.
The power supply is not
connected properly.
The refrigerator has recently
been switched off for a period
of time.
You have put in too much fresh
or hot food.
Doors are opened too often or
for too long.
The ground is uneven or weak.
Vibration comes from
objects placed on top of the
refrigerator.
The refrigerator touches the
wall or a piece of furniture.
This is normal if defrosting.
Check if the power supply is
connected properly.
The refrigerator takes a few hours
to cool down completely.
Hot food causes the refrigerator
to take longer to reach the desired
temperature.
Warm air entering the refrigerator
has the same effect. Do not open
the door too often.
Make sure that the floor is level,
solid, and can support the weight
of the refrigerator.
Remove the objects.
Move the refrigerator so that
it does not touch the wall or
furniture.
Bolero CoolMarket 4D
490 Dark E
02456
Bolero CoolMarket 4D
490 Glass E
02457