Publicidad
Idiomas disponibles
Idiomas disponibles
12
SAFETY
This section contains information and important notes on safe commissioning and handling of the
machine.
For your personal safety, please read these operating instructions carefully before
commissioning. This will enable you to handle the machine safely and prevent
misunderstandings as well as personal injury and damage to property. Also observe
the symbols and pictograms used on the machine as well as the safety and danger
information!
12.1 Intended Use of the Machine
The machine is intended exclusively for the following activities:
Edge banding (PVC, ABS, PP, wood) on wood-based materials such as chipboard, MDF, HDF and
lightweight boards using a hot melt adhesive within the technically specified limits.
HOLZMANN MASCHINEN
beyond this and for any resulting damage to property or injuries.
12.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity
Temperature (operational)
Temperature (Storage, Transport)
12.1.2
Prohibited Use / Forseeable Misuse
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine in a potentially explosive environment (machine can generate
ignition sparks during operation)
-
Operation of the machine in closed rooms without chip and dust extraction (a normal
household vacuum cleaner is not suitable as an extraction device).
-
Operating the machine outside the limits specified in this manual
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
-
Machining of materials with dimensions outside the limits specified in this manual
-
Use of tools which do not meet the safety requirements of the standard for machine tools
for woodworking (EN847-1).
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
12.2 User Requirements
The physical and mental suitability as well as knowledge and understanding of the operating
instructions are prerequisites for operating the machine. Persons who, because of their physical,
sensory or mental abilities or their inexperience or ignorance, are unable to operate the
machinery safely must not use it without the supervision or instruction by a responsible person.
Please note that local laws and regulations may stipulate the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
12.3 Safety Devices
The machine is equipped with the following safety devices:
symbol pic
HOLZMANN MASCHINEN GmbH
assumes no responsibility or warranty for any other use or use
Two self-locking EMERGENCY STOP button to stop dangerous
•
movements at any time.
www.holzmann-maschinen.at
max. 65 %
+5° C bis +40° C
-20° C bis +55° C
SAFETY
36
KAM215all
Publicidad
