Publicidad
Idiomas disponibles
Idiomas disponibles
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new device brings you much enjoy-
ment and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified,
Note:
Read the whole text of the operating manual before
assembly and commissioning.
This operating manual should help you to familiarise
yourself with your tool and to use it for its intended
purpose.
The operating manual includes important instructions
for the safe, proper and economic operation of the
tool, for avoiding danger, for minimising repair costs
and downtimes and for increasing the reliability and
extending the service life of the tool.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the tool in your country.
Keep the operating manual package with the tool at
all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and care-
fully observed by all operating personnel before start-
ing the work. The tool may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
Familiarise yourself with the operating manual before
attempting to operate the device.
2. Device description
1. Engine drive unit
2. Lifting eye
3. On/Off switch
4. Switch lock
5. Rear handle
6. Spark plug connector
7. Start pull cord
8. Fuel tank
9. Throttle
10. Front handle
11. Unlocking pin
12. Engine drive unit locking screw
Scythe attachment
13. Brush cutter / grass trimmer
14. Brush cutter / grass trimmer shield
14a. Brush cutter / grass trimmer cutting blade shield
15. Cutting blade
15a. Protective cover
16. Thread coil
16a. Trigger
Hedge trimmer attachment
17. Hedge trimmer
18. Adjustment lever
19. Cutting unit
20. Protective cover
Pole-mounted pruner attachment
21. Pole-mounted pruner
22. Protective ring
23. Oil tank
24. Guide bar fixing nut
25. Saw chain
26. Guide bar
27. Protective cover
28. Carrying strap
29. Oil-petrol mixing bottle
30. Spark plug wrench
31. Allen key size 4
32. Allen key size 5
33. Positioning hole
34. Rubber ring
35. Hoop guard
36. Allen screw
37. Screw (pre-mounted)
38. Internal flange
39. Threaded mandrel
40. External flange
41. Cover
42. Nut
43. Chain cover
44. Chain wheel
45. Chain tensioning screw
45a. Chain tensioning bolt
46. Oil tank cover
www.scheppach.com
GB | 41
Publicidad
