Publicidad
Idiomas disponibles
Idiomas disponibles
Spare parts / accessories
You can always use the protective device supplied
with the machine for the sets of blade and saw chain
listed here.
14. Cleaning and storage
14.1 Cleaning
• Keep the handles free of oil so that you always
have a secure grip.
• If necessary, clean the device with a damp cloth
and, if necessary, with a mild flushing liquid.
m Attention!
• Pull out the spark plug connector before cleaning.
• Never immerse the device in water or other liquids
for cleaning.
• Store the device in a secure and dry place and out
of reach of children.
14.2 Storage
Clean and maintain the device before storing it.
Caution:
Never stow the device for longer than 30 days without
carrying out the following steps:
Stowing the device for more than 30 days
If you stow the device for longer than 30 days, it must
be prepared ahead of time. Otherwise, the remaining
fuel in the carburettor will evaporate and leave a rub-
bery sediment behind. This could make it difficult to
start and result in expensive repair work.
• Drain the fuel (see 9.3.1).
• Start the engine and let it run until it stops in order
to remove the fuel from the carburettor.
• Allow the engine to cool down (approx. 5 minutes).
• Remove the spark plug (see 13.2.1).
• Add 1 teaspoon of clean 2-stroke oil to the combus-
tion chamber.
• Pull the starter cable slowly several times to coat
the internal components.
• Re-insert the spark plug (see 13.2.1).
Note:
Store the device in a dry location, far away from po-
tential sources of ignition, such as furnaces, hot water
boilers with gas, gas dryers, etc.
14.3 Re-commissioning after a long period of
storage
• Remove the spark plug (see 13.2.1).
• Pull the starter cable quickly to remove excess oil
from the combustion chamber.
• Clean the spark plug and make sure that the elec-
trode gap on the spark plug is correct. Or insert a
new spark plug with the correct electrode gap.
• Re-insert the spark plug (see 13.2.1).
• Prepare the device for operation.
60 | GB
15. Disposal and recycling
Notes for packaging
You can find out how to dispose of the disused
device from your local authority or city adminis-
tration.
Fuels and oils
• Before disposing of the unit, the fuel tank and the
motor oil tank must be emptied!
• Fuel and engine oil do not belong in household
waste or drains, but must be collected or disposed
of separately!
• Empty oil and fuel tanks must be disposed of in an
environmentally friendly manner.
www.scheppach.com
The packaging materials are
recyclable. Please dispose of
packaging in an environmen-
tally friendly manner.
Publicidad
