Look X-Track Power Manual Del Usuario página 19

EN
05
Connect your pedals.
Pair the pedals with the application.
If the pedals are back in sleep mode, rotate your
cranks backward until the LED indicator lights up on
both pedals.
To know :
For a dual version, the left pedal is the main
pedal, and the right pedal is the 'secondary'
pedal. Simply pair the 'main' pedal for a 'dual'
version. The 'secondary' pedal will not appear.
For a 'single' version, only the left pedal is
instrumented and will appear.
06
Register your warranty.
Warranty registration via the application takes only
a minute.
It grants you access to:
3 years of warranty on your LOOK POWER
power sensor (from the date of purchase).
Preferential access to the 'Confidence Contract'
program for replacement in case of a fall.
Easy access to our customer service, warranty
services, and returns.
Exclusive information about your product
(firmware updates, new features, etc.) in
advance.
07
Configure your power sensor.
A / Enter the crank arm length in the application.
To know :
If you have already entered this information in
your profile, it will appear automatically in the
associated field.
Where can I find the length of my
crank arms?
You can find this information inside the crank
arms of your crankset, near the pedal, in the
vast majority of cases. Most crank arms have a
length of 170 mm, 172.5 mm, or 175 mm.
B / Initiate the calibration using the application.
-Place the bike in a vertical or upright position.
-Position the crank arms vertically.
-Ensure that no force is applied to the pedals
(remove your feet from the pedals and do not move
the pedals during calibration).
08
Install your cleats
Refer to the 'Cleat Installation' section.
EN