Publicidad
Idiomas disponibles
Idiomas disponibles
14. Initial rinse
"Before operating the machine, perform a
rinse of the internal circuits and change the
water in the boiler."
14.1 Changing the water in the internal groups circuits
Via the continuous distribution key (30), empty the water
from each group for approximately one minute. Repeat
this operation twice.
14.2 Changing the water in the boiler
Ensure that the indication on the display (78) corresponds
to the working pressure value.
Keep the hot water distributor key (13a) pressed down for
approximately 5 seconds, the water from the boiler will
drain from the hot water nozzle (10).
When only steam is issued from the nozzle (10), press the
hot water distributor key (13a) again.
The machine will return to its normal functions and the
15. Drinks distribution - coffee
21, 25), clean it of the used coffee
press.
21, 25
in place. Position the cup (or cups) under the spout (or
Press the coffee distribution key (26, 27, 28 or 29)
corresponding to the desired dose, the coffee will be issued
and will stop automatically upon completion.
Press the continuous/STOP distribution button (30) for a
continuous distribution.
The distribution, both dosed and continuous, may be
interrupted at any time by pressing the continuous/STOP
key (30).
Note: The LEDs above the dispensing buttons are
merely decorative.
21, 25) of the distributor groups.
21, 25).
13a
10
26
27
28
10 EN
25 (21)
30
30
29
25
Publicidad
