Publicidad
Idiomas disponibles
Idiomas disponibles
17.1 Programming the coffee measures
" Before programming the coffee dispensing
correct serving of ground coffee. Don't use
coffee grouts for programming servings."
unit, positioning the cup (or cups) under the nozzle (or
Press (and keep momentarily pressed) the coffee
dispensing push button (26, 27, 28 or 29) corresponding
to the required serving to be programmed.
When the amount of coffee in the cup reaches the required
level, release the coffee dispensing push button.
Repeat the above operations for the other coffee push
buttons.
Note: if you make a programming mistake, use a new
dose of ground coffee and repeat the operation.
17.2 Programming the hot water distribution keys
PROGRAMMING THE HOT WATER DISTRIBUTION KEYS
(13a, 13b or 13c)
To perform the programming of the coffee dose follow the
procedure herebelow:
1) Place a container by the hot water distribution nozzle
(10).
2) Press one of the hot water distribution and keep it pressed
3) When the quantity of water in the container has reached
the desired level, release the key
17.3 Programming the milk distribution key
PROGRAMMING THE MILK DISTRIBUTION KEY (16)
To perform the programming of the milk dose follow the
procedure herebelow:
1) Insert the tube (18d) into the milk.
2) Place the cup by the cappuccino maker (18).
3) Press the milk distribution key (16) and keep it pressed.
4) When the quantity of milk in the cup has reached the
desired level, release the key (16).
25) on the coffee dispenser
25).
26
27
28
13a
13b
13c
10
15 EN
30
29
25
16
18
18d
Publicidad
