Publicidad
Idiomas disponibles
Idiomas disponibles
AKORN
Auto-Kamado
®
POWER
1. Ensure Controller Adapter is securely plugged in to GFCI outlet
2. Press Power Button for 1 second to turn controller ON
3. Press and hold Power Button for 2 seconds to turn Controller OFF
4. Press Power Button for 1 second when running to Pause, Press again for 1 second to Resume
NOTE: Use the Pause Function when checking food or adding additional fuel.If Pause has been
enabled for 10 minutes Controller will beep to alert user to resume or turn off grill. A push notification
will also be sent to the App.
SET GRILL TEMPERATURE
1. Press Grill Temperature Button
2. Adjust desired temperature target by rotating Control Knob (max 700°F)
3. Press Control Knob to select desired grill temperature target
4. Suggested Damper setting will blink for 5 seconds, set damper notch to the corresponding number
SET MEAT PROBE TEMPERATURE
1. Insert Meat Probe Connector into Probe Jack (Controller can accommodate up to 2 meat probes)
2. Press Meat Probe Temperature Button
3. Adjust desired internal meat temperature by rotating Control Knob (max 225°F)
4. Press Control Knob to select desired temperature
5. Press Meat Probe Button to switch between Probes 1 & 2
6. Alarm will sound when internal temperature is reached (press any button to stop alarm)
NOTE: Meat Probe should not be used to measure Ambient Air temperature in the grill and and will
be permanently damaged if it exceeds 250°F.
SET TIMER
1. Press Timer Button
2. Adjust desired timer duration by rotating Control Knob
NOTE: Timer will change in 1-minute increments, shorter increments are available by using
the Char-Griller
3. Press Control Knob to select desired time
4. Alarm will sound when timer completes (press any button to stop alarm)
C-10
™
App
®
Digital Controller (Continued)
Publicidad
