Publicidad
Idiomas disponibles
Idiomas disponibles
AKORN
Auto-Kamado
®
MANUAL FAN SPEED
If desired or required during troubleshooting, you can manually set the fan speed of your AKORN
Auto-Kamado. This will override all temperature automation features. Use manual fan control with
caution, as more fan power will equal more flame and heat. Because of the efficient and insulated
design, it is difficult to decrease temperature once it has increased above your ideal temperature.
1.
Press the fan button.
2. Adjust desired fan speed, from 0 to 100, by rotating the Control Knob.
3. Press the knob to select the fan setting. This will override the temperature automation.
4. To return to AUTO mode, press and hold the fan button.
NOTE: While in manual fan mode, the grill temperature display will toggle between the fan
speed and the grill temperature.
• DO NOT use a charcoal chimney to ignite charcoal.
Over-activation of charcoal will prevent controller from
being able to control temperature.
• BE PATIENT. Time to reach desired temperature
will vary by fuel type, number of fire starters and
placement, as well as weather conditions. See Lighting
Instructions on pages C-2 – C-5.
• Use ONE fire starter for smoking (200-250°F).
• TWO fire starters can be used to achieve higher
temperatures (350-700°F).
• The appropriate fuel amount must be added to reach
desired temperature. See Lighting Instructions on
pages C-2 – C-5.
ATTENTION!
Digital Controller (Continued)
™
Please Review ALL of the Lighting
Instructions Prior to Operating Grill
• When smoking (200-250°F), if the grill
exceeds the set temperature by +50°F it
may be challenging to reach desired temperature.
• It is NOT possible to go from Grilling or Searing (350-
700°F) to Smoking temperatures (200-250°F). Grill must
be shut down, charcoal extinguished, and restarted 1-2
hours later.
• DO NOT set temperature to higher than desired
temperature in an attempt to reach desired temperature
faster. This will result in over activating the charcoal
and inability to maintain the desired temperature.
• DO NOT use the Heat Deflector at temperatures higher
than 450°F.
™
C-11
Publicidad
