Publicidad
Idiomas disponibles
Idiomas disponibles
Pando Gas cooktops
Pando gas hobs
Pando gas hobs
Pando gas hobs
These adjustment instructions apply only to
These adjustment instructions apply only to
These adjustment instructions apply only to
burners operating at G20, while for burners
burners operating at G20, while for burners
burners operating at G20, while for burners
operating at G30 or G31 the screw must be
operating at G30 or G31 the screw must be
operating at G30 or G31 the screw must be
screwed in completely (clockwise).
screwed in completely (clockwise).
screwed in completely (clockwise).
LUBRICATION OF THE KEYS.
LUBRICATION OF THE KEYS.
LUBRICATION OF THE KEYS.
If a tap is blocked, do not force it and ask
If a tap is blocked, do not force it and ask
If a tap is blocked, do not force it and ask
for technical assistance.
for technical assistance.
for technical assistance.
CLEANING
CLEANING
CLEANING
CLEANING
ATTENTION:
ATTENTION:
ATTENTION:
ATTENTION:
Before each cleaning operation, disconnect the
Before each cleaning operation, disconnect the
Before each cleaning operation, disconnect the
Before each cleaning operation, disconnect the
appliance from the gas supply and the electrical
appliance from the gas supply and the electrical
appliance from the gas supply and the electrical
appliance from the gas supply and the electrical
supply.
supply.
supply.
supply.
Worktop
Worktop
Worktop
Worktop
If the surface of the hob is to be kept shiny, it is
If the surface of the hob is to be kept shiny, it is
If the surface of the hob is to be kept shiny, it is
very important to wash it after use with warm
very important to wash it after use with warm
very important to wash it after use with warm
soapy water, rinse and dry it. Likewise, the
soapy water, rinse and dry it. Likewise, the
soapy water, rinse and dry it. Likewise, the
enameled grates, enameled covers "A", "B" and
enameled grates, enameled covers "A", "B" and
enameled grates, enameled covers "A", "B" and
"C" and the burner heads should be washed and
"C" and the burner heads should be washed and
"C" and the burner heads should be washed and
the spark plugs "AC" and thermocouple sensors
the spark plugs "AC" and thermocouple sensors
the spark plugs "AC" and thermocouple sensors
"TC" should be cleaned. These components
"TC" should be cleaned. These components
"TC" should be cleaned. These components
must not be washed in the dishwasher. Clean
must not be washed in the dishwasher. Clean
must not be washed in the dishwasher. Clean
gently with a small nylon brush as shown and
gently with a small nylon brush as shown and
gently with a small nylon brush as shown and
allow to dry thoroughly. Cleaning should be
allow to dry thoroughly. Cleaning should be
allow to dry thoroughly. Cleaning should be
carried out with the board and its components
carried out with the board and its components
carried out with the board and its components
cold, without the use of metallic sponges,
cold, without the use of metallic sponges,
cold, without the use of metallic sponges,
abrasive powders or corrosive sprays.
abrasive powders or corrosive sprays.
abrasive powders or corrosive sprays.
Do not allow your surfaces to remain in contact
Do not allow your surfaces to remain in contact
Do not allow your surfaces to remain in contact
with products such as vinegar, coffee, le- che,
with products such as vinegar, coffee, le- che,
with products such as vinegar, coffee, le- che,
saline water or lemon or tomato juice.
saline water or lemon or tomato juice.
saline water or lemon or tomato juice.
WARNINGS:
WARNINGS:
WARNINGS:
When reassembling the components, it is
When reassembling the components, it is
When reassembling the components, it is
advisable
to
observe
advisable
to
observe
advisable
to
observe
recommendations:
recommendations:
recommendations:
•
Check that the cracks in the "T" burner heads
•
Check that the cracks in the "T" burner heads
•
Check that the cracks in the "T" burner heads
are not obstructed by foreign bodies.
are not obstructed by foreign bodies.
are not obstructed by foreign bodies.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
FIG.6
FIG.6
the
following
the
FIG.6/B
following
the
following
FIG.6/B
Make sure that the enamelled caps "A", "B"
Make sure that the enamelled caps "A", "B"
Make sure that the enamelled caps "A", "B"
and "C" are correctly positioned on the burner
and "C" are correctly positioned on the burner
and "C" are correctly positioned on the burner
head. This is verified when the cover placed
head. This is verified when the cover placed
head. This is verified when the cover placed
on the head is perfectly stable.
on the head is perfectly stable.
on the head is perfectly stable.
The
louvres
must
The
louvres
must
The
louvres
must
appropriate
centring
appropriate
centring
appropriate
centring
aluminium profile). Check for perfect stability.
aluminium profile). Check for perfect stability.
aluminium profile). Check for perfect stability.
If it is difficult to open and close a key, do not
If it is difficult to open and close a key, do not
If it is difficult to open and close a key, do not
force it: call for technical assistance as soon
force it: call for technical assistance as soon
force it: call for technical assistance as soon
as possible.
as possible.
as possible.
Do not use steam jets to clean the appliance.
Do not use steam jets to clean the appliance.
Do not use steam jets to clean the appliance.
To
prevent
possible
To
prevent
possible
To
prevent
possible
periodically carry out a thorough cleaning of
periodically carry out a thorough cleaning of
periodically carry out a thorough cleaning of
the spark plugs (ceramic and electrode) and
the spark plugs (ceramic and electrode) and
the spark plugs (ceramic and electrode) and
thermocouples.
thermocouples.
thermocouples.
FIG.6/A
FIG.6/A
FIG.6/C
Note: Continued use may cause the
Note: Continued use may cause the
Note: Continued use may cause the
burner area to take on a different colour
burner area to take on a different colour
FIG.6/C
burner area to take on a different colour
from the original due to the high
Note: Continued use may cause
from the original due to the high
from the original due to the high
temperature.
the burner area to take on a different
temperature.
temperature.
colour from the original due to the
high temperature.
English
English
English
English
be
placed
on
the
be
placed
on
the
be
placed
on
the
pins
(or
on
the
pins
(or
on
the
pins
(or
on
the
ignition
problems,
ignition
problems,
ignition
problems,
101
101
Integral Cooking
Integral Cooking
Integral Cooking
23
Integral Cooking
23
Integral Cooking
23
Publicidad
