Publicidad
Idiomas disponibles
Idiomas disponibles
English
English
Plate Fixing
Plate Fixing
The plate is equipped with a special gasket to
The plate is equipped with a special gasket to
prevent any infiltration of liquid into the cabinet.
prevent any infiltration of liquid into the cabinet.
To install this gasket correctly, it is advisable to
To install this gasket correctly, it is advisable to
carefully follow the instructions below:
carefully follow the instructions below:
1. Remove all moving parts from the plate.
1. Remove all moving parts from the plate.
2. Take the insulating sealing strips carefully,
2. Take the insulating sealing strips carefully,
carefully remove the transparent plastic cove-
carefully remove the transparent plastic
ring the adhesive part of the strip. Then turn
covering the adhesive part of the strip. Then
the gas plate upside down and stick the "E"
turn the gas plate upside down and stick the
strip correctly, following the outer edge of the
"E" strip correctly, following the outer edge of
gas plate all the way around the perimeter.
the gas plate all the way around the
Make sure that the ends of the strips match
perimeter. Make sure that the ends of the
without overlapping.
strips match without overlapping.
Apply the adhesive strip evenly and securely
Apply the adhesive strip evenly and securely
to the plate, pressing with your fingers.
to the plate, pressing with your fingers.
3. Position the hotplate in the hole in the
cabinet and fix it with the screws "F" of the
fixing hooks "G".
3. Position the hotplate in the hole in the cabi-
net and fix it with the screws "F" of the fixing
hooks "G".
A
96
96
Integral Cooking
Integral Cooking
18
Integral Cooking
FIG. 9
FIG. 10
FIG. 9
6. To prevent accidental contact with the surfa-
6. To prevent accidental contact with the surface
ce of the top frame, which may become hot
of the top frame, which may become hot
during operation, a wooden spacer must be
during operation, a wooden spacer must be
screwed in place at a minimum distance of 70
screwed in place at a minimum distance of
mm from the edge.
70 mm from the edge.
Caution:
Caution:
FIG. A
Do not allow the glass edge (A) to rest on the
Do not allow the glass edge (A) to rest on the
worktop or work surface alone, it must be the
worktop or work surface alone, it must be the
metal edge (B) that rests on it, which must be in
metal edge (B) that rests on it, which must be in
contact with the worktop It is important to
contact with the worktop It is important to
respect the fitting dimensions.
respect the fitting dimensions.
FIG. A
Pando Gas cooktops
Pando gas hobs
Horizontal
wooden
divider
FIG. 10
Publicidad
