Publicidad
Idiomas disponibles
Idiomas disponibles
English
INSTALLATION
TECHNICAL DATA FOR INSTALLERS
The installation, adjustments, conversions and maintenance described here must be carried out in
accordance with the following instructions carried out exclusively by qualified personnel.
The equipment must be installed correctly, in accordance with the standards in force and according
to the manufacturer's instructions. Incorrect installation may cause damage to persons, animals or
property, for which the manufacturer cannot be held responsible.
The safety devices or automatic control devices of the equipment during the service life of the equip-
ment may only be modified by the manufacturer or the authorised supplier.
Plate Insertion
1. Remove the external packaging and the internal packaging of the various moving parts and make
sure that they are intact. If in doubt, do not use the appliance and contact qualified personnel.
Packaging elements (cardboard, bags, polystyrene, nails, etc.) must not be left within the reach of
children, as they are a source of danger.
2. Always make an opening in the cabinet in strict compliance with the critical distances between the
surface, the side walls, the rear wall and the top wall, as shown on the next page. The equipment
is classified as class 3 and is therefore subject to all the regulations foreseen for such equipment.
Fitting dimensions
PGA 4491
94
94
Integral Cooking
Integral Cooking
PGA 4260
Pando Gas cooktops
PGA 4370
Publicidad
