Publicidad
Idiomas disponibles
Idiomas disponibles
Pando gas hobs
Pando Gas cooktops
COMMON PROBLEMS AND SOLUTIONS
COMMON PROBLEMS AND SOLUTIONS
Problem
The burner flame is not
uniform.
Burner
flame
suddenly
changes / explodes.
The flame takes too long
to ignite.
The flame goes out after
ignition.
Change of colour of the
grids in the cooking zone.
The flame does not ignite
when the button is pressed
(glow plugs emit a spark).
The flame does not ignite
when the button is pressed
(glow plugs do not emit a
spark).
The electric ignition does
not work.
Glow
plugs
continuously.
Cause
Presence of dirt inside the
burner crown.
Incorrect gas adjustment.
Incorrect assembly of burner
components.
Incorrect assembly of burner
components.
Release of the precipitated
ignition control
Thermocouple problems
Normal situation, caused by
high temperature or dirt.
Lack of gas or residues of
solvents or detergents in the
glow plugs.
Problems with the spark plug
or ignition.
Lack of electricity.
Incorrect mounting or misfiring. Call the Technical Helpdesk
spark
Humidity.
Incorrect assembly or
breakage of the microphone.
Solution
Clean the burner crown
foreign bodies.
Call the Technical Helpdesk
ca Official Pando.
Assemble the burner components
correctly.
Assemble the burner components
correctly.
Clean
the
grates
components
with
cleaning agents.
Move the thermocouple
Call the Technical Helpdesk
ca Official Pando.
Check that the socket is plugged in.
Check that the meter is switched on.
Open the gas valve counter; clean the
glow plugs as described in chapter
"Cleaning".
Call the Technical Helpdesk
ca Official Pando.
Check that the power socket is
connected. Check that the meter is
switched on.
ca Official Pando.
Disconnect the power supply for 24
hours and allow the top to dry; check
that all shells are correctly mounted.
Call the Technical Helpdesk
ca Official Pando.
English
English
and
burner
suitable
metal
Integral Cooking
15
93
93
Integral Cooking
Integral Cooking
Publicidad
