Publicidad
Idiomas disponibles
Idiomas disponibles
English
SAFETY INSTRUCTIONS
IMPORTANT: During installation, before making the elec-
trical connection to your gas hob, always disconnect the power
panel that will supply it (differential or thermal-magnetic switch
from the general electrical panel of the house).
• The negative pressure in the room should not exceed 0.04 mbar. This
condition allows for optimal operation. To achieve this environment, it is
necessary to have a permanent air inlet to avoid air tightness (it is advi-
sable to have a ventilation grille for this purpose). Windows and doors are
not valid for this.
• The electrical power supply must be stable and meet the electrical requi-
rements indicated (refer to the appliance's nameplate). If it is not stable
and receives a supply with voltage, current, or frequency variations, such
as harmonics, transients, voltage sags, overloads, electrical storms, etc.,
the gas hob may malfunction or even fail, and the repair will not be cove-
red by the warranty. In such a case, it is necessary to disconnect the hob
and contact an electrician or the power company to address the electrical
supply issue.
88
88
Integral Cooking
Integral Cooking
Pando Gas cooktops
Publicidad
