Publicidad
Idiomas disponibles
Idiomas disponibles
14
Analog Audio
You can connect up to 4 channels of balanced analog audio in or out via 3 pin XLR
connectors. Select your audio input using the 'audio' tab in the dashboard menu. See the
'audio' section later in this manual for more information.
15
Monitor Out
A 3G-SDI monitor out connection provides a downscaled output with overlays so that you
can monitor on an external display. The overlays include focus and exposure tools such as
grid and false color that you can toggle on and off as well as drive icons, audio meters and
a time counter display. For more information on the Monitor SDI settings, including how to
output a clean signal, see the 'monitor' page in the settings section later in this manual.
16
Ext Disk
Connect a flash disk to the USB-C connector on the rear so you can record to external
disks at up to 10Gb/s. You can also connect to multi port USB-C hubs or the MultiDock 10G
allowing you to connect one or multiple SSDs for far greater storage capacity! Recording to
high speed SSD's and hard drives reduces the risk of problems with your media compared
to CFast 2.0 cards. For more information on external disks, see the 'storage media' section
later in this manual.
17
SDI Digital Video
HyperDeck Extreme features 12G-SDI inputs and outputs on the rear for video signals from
standard definition to Ultra HD via a single cable. Four 12G-SDI inputs and outputs on the
rear of HyperDeck Extreme 8K HDR can be used for 8K30p via dual link 12G-SDI and up to
8K60p via quad link 12G-SDI.
Using the quad link 12G-SDI connections you can use HyperDeck Extreme in 8K workflows.
Connect it to ATEM Constellation 8K as a playback or recording device that can be
accessed via the HyperDecks palette in ATEM Software Control
Connect your 4 12G-SDI cables from the input or output on the HyperDeck Extreme to
one of the 8K inputs or outputs on the rear of the ATEM Constellation 8K. It is important
to connect your quad link SDI cables in the correct order. For example, connect the
SDI input or output labeled 'c' on HyperDeck Extreme to the third input or output on the
ATEM Constellation 8K.
HyperDeck Extreme Rear Panel
15
Publicidad
