Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 52

Idiomas disponibles

The following CFast 2.0 cards are recommended for recording Ultra HD ProRes LT up to 60fps.

Delkin Devices

ProGrade Digital

Slower CFast cards are compatible when the optional cache is installed. This is

because the cache can accept overflow data when the card cannot keep up. However,

it might take a few minutes for the cache to finish copying to the card when recording

stops, depending on the speed of the media card.

With HyperDeck Extreme you can record directly to USB-C flash disks via the 'ext disk' USB-C

connection. These fast, high capacity drives allow you to record video for long periods. You can

then connect the flash disk to your computer and edit directly from them!

For even higher storage capacities, you can connect a USB-C dock or external hard drive.

To connect your Blackmagic MultiDock 10G or USB-C flash disk, connect a cable from your

USB-C connected device to the 'ext disk' port on the rear of HyperDeck Extreme.

Choosing a USB Drive

The following USB-C drives are recommended for recording 8K ProRes HQ up to 60 fps.

DelKinDevices

Extreme Pro CFast 2.0 SDCFSP-512G-x46D

CFA-5120 3500X CFast 2.0

CFA-10240 3500X CFast 2.0

CFA-20480 3600x CFast 2.0

AV PRO CF XT

510MB/s CFast 2.0

3600x CFast 2.0 Card

Professional 3500X CFast 2.0

550MB/s CFast 2.0

Storage Media