Descargar Imprimir esta página

Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 535
Frame Guides
Guides provide a range of aspect ratios from various film, television and online standards.
Tap the toggle switch to on and then select your guide by tapping the left and right arrows or
by dragging the slider control.
Grid
The grid option lets you select overlays to assist with shot framing.
Thirds
Thirds will overlay two horizontal and two vertical lines over your image, breaking it up
into 9 smaller sections to help you compose your shot. The human eye typically looks
for action near the points where the lines intersect, so it's helpful to frame key points
of interest in these zones. An actor's eyeline is commonly framed along the top third of
the screen, so you can use the top third to guide your framing.
Crosshairs
The 'crosshairs' setting places a crosshair in the center of the frame. Like thirds, the
crosshairs is a very useful compositional tool, making it easy to frame the subject of a
shot in the very center of a frame. This is sometimes used when filming scenes that will
be assembled using very fast cuts. Keeping viewers' eyes focused on the center of a
frame can make rapid editing easier to follow.
Center Dot
The 'center dot' setting places a dot in the center of the frame. This works in exactly
the same way as the 'crosshair' setting, albeit with a smaller overlay that you may find
less intrusive.
You can enable a combination of 'thirds' and 'crosshairs' or 'thirds' and 'center dot'
by tapping both options in the 'grids' menu. 'Crosshairs' and 'center dot' cannot be
selected together.
Touchscreen Display
19

Publicidad

loading

Este manual también es adecuado para:

Hyperdeck extreme controlHyperdeck extreme 8k hdr