Publicidad
Idiomas disponibles
Idiomas disponibles
Storage Indicators
The storage indicators display the status of the media slots including record duration available.
The first two icons represent 2 CFast card slots on the front panel. The third drive icon displays
the active USB flash disk connected via the 'ext disk' connector on the rear panel or network
storage via Ethernet.
Your active drive is used for playback and recording. Once a drive is filled, recording will spill
over to the next drive, ensuring you don't miss a frame.
For more information on storage indicators, see the 'storage media' section later in this manual.
Audio Meters
On screen audio meters display four audio channels of any source. Channels 1 and 2 will always
appear first followed by a second pair of channels, which are usually 3 and 4. Using the monitor
channels settings in the audio menu, you can select a different pair of channels to monitor. For
more information, refer to the audio tab in the dashboard menu section later in this manual.
When in record mode you can adjust the levels of XLR audio using the sliders beneath each
channel by tapping on the audio meters to reveal the overlay.
When in playback mode, you can use the slider beneath each channel to adjust the XLR audio
output levels. Idle or disabled audio channels will be grayed out.
The audio meters will display your current audio via a VU or PPM
audio monitor. Disabled audio tracks will be grayed out
You can select your meter type via the audio tab in the dashboard menu.
On screen icons let you see the status
of your storage at a quick glance
The audio meters will display your current
audio as a VU or PPM audio monitor.
Tap on the audio meters to adjust levels
Touchscreen Display
27
Publicidad
