Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 45

You can now press the '3DLUT' button on the front of the panel to display the selected LUT.
The button will illuminate when selected. Press the button again to toggle it off.
TIP You can also toggle the display LUT on the LCD and Monitor SDI via the 'monitor'
tab in the touchscreen menu. For more information, see the 'monitor' settings earlier in
this manual.
You are not limited to using the preloaded display LUTs either, you can import or export your own!
To import a LUT:
1 On the LUTS tab, tap on the double head arrow icon at the bottom center of the display.
2 Under manage LUT, tap on 'import LUT'.
3 Select the storage media where the LUT is located and tap 'import'.
Select the location of your stored LUT and tap import.
4 Tap on the LUT you want to import followed by 'import'. A progress screen will let you know
the LUT is importing. Once done, the LUT will appear in the list.
The LUT will now appear in the list and once you make it active your can apply it to the LCD and
external monitor.
NOTE If you try to import a LUT that already exists, a screen will prompt you to either
keep both or replace the existing LUT.
Settings 45