Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 48

Idiomas disponibles

When the shot number or scene letter advance the take number reverts to '1.'

You can add descriptions in the take number editor. These are on the right of the take number

keyboard and correspond to the following scenarios:

'Pick up.' This refers to a reshoot of a previous take to add additional material after

principal photography has wrapped.

'Visual effects.' This refers to a take or shot for visual effect use.

'Series.' This refers to a situation in which multiple takes are shot while the camera is

kept running.

Tap 'A' to enable 'auto take increment' when in 'standby' mode. This

will automatically advance the take number for each clip recorded.

A small 'A' appears next to the take number on the slate when

enabled. When entering 'take' metadata, prompts for additional

shot types will appear to the right of the touch keyboard

Tap the 'good take' indicator to tag good takes for easy recall in post production. This button

applies the 'good take' tag to the clip currently being viewed in 'playback' mode. If the camera

is in 'standby' mode and ready to record, the 'good take last clip' button applies a 'good take'

tag to the last clip recorded.

Interior / Exterior

Tap 'interior' or 'exterior' to add a tag to the next clip in standby mode, or the current clip in

playback mode.

Tap the 'day' or 'night' icons to add a 'day' or 'night' tag to the next clip in standby mode,

or the current clip in playback mode.

Entering Metadata