Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
This document contains important safety and operation instructions
for tool storage units. Refer to this information often for safe usage
and operation.
SAVE THESE INSTRUCTIONS
When using electric products, and tool storage units, basic
precautions should always be followed, including the following:
Improper assembly can cause unsafe conditions.
Read instructions before using or assembling.
Maintain safety labels. If label is worn or
damaged, replace label.
Unsafe conditions can cause injury.
Particles may fly during assembly.
Wear safety goggles (User and bystanders).
Flying particles can cause eye injury.
To reduce the risk of injury, close supervision is necessary
when this product will be used around children.
Keep children away.
Unsupervised children can be injured.
8
To reduce the risk of injury,
never overload drawers or shelves.
Refer to installation and loading instructions.
Overloaded shelves or drawers can cause injury or damage.
Units can tip or strike you.
• Do not open more than one loaded drawer at a time
• Do not force open a drawer kept closed
by drawer control slide
• Close lid and lock drawers before moving
• Apply brakes on locking casters when not moving unit
• If unit begins to tip, stand clear
• Do not open any drawer with swivel caster
positioned inward
• Do not step in or on drawers
• Do not use any open drawer as support or leverage
• Do not use add-ons as standalone units
• Secure units together with fasteners
• Unit to be used on level ground only
• Disconnect or unplug all power cord
and cable assemblies before moving unit
Tipping of storage unit or unit striking you
can cause injury.
Component edges can cut or pinch.
• Wear gloves when removing and
installing components into PowerDrawer
• Keep fingers clear of edges when working near
or with sheet metal components
• Keep hands and fingers clear
of prybar or sharp objects
Units' edges or components can cause injury.
SAFETY PRECAUTIONS
Risk of electric shock and fire.
• Refer to loading instructions or markings
for the proper load on receptacles
• Do not remove the ground connection
• Do not expose to rain, snow, or wet conditions
• Do not operate with damaged cord or plug
• Replace damaged cord or plug immediately
Electric shock or fire can cause injury.
Risk of explosion.
• Flammable liquids or vapors can ignite
• This equipment should not be located
in a recessed area or below floor level
• Powered work surface and PowerDrawer
have internal arcing or sparking parts
• Do not expose to flammable liquids and/or vapors.
Powered work surface and PowerDrawer components
to be mounted at least 460 mm (18 inches) or more
above the floor
Explosion or flame can cause injury.
SAFETY PRECAUTIONS
NOTE: This caution applies to tool storage units that use 120VAC,
60Hz. For tool storage units that use power other than 120VAC, 60Hz,
refer to owner's manual supplement for max cumulative load.
Risk of electrical shock and fire.
• 12A maximum cumulative load for all receptacles
Electrical shock or fire can cause injury.
Risk of tripping.
• Do not use extension cords with PowerDrawer
or powered work surface outlets
• Do not place any power cord or cable assembly in walkway
• Disconnect or unplug all power cords
and cable assemblies before moving unit
Tripping can cause injury.
9
Publicidad
