Pando PVMB 30-16CR Manual página 166

English
EN
ASSEMBLY INSTRUCTIONS UNDER WORKTOP
For models only:
Ensure that your installation does not block the front ventilation grille. The unit is designed to fit
under worktops between 820 and 890mm high, using the adjustable vent to ensure that the feet
are hidden from front view. Remove the screws from the adjustable ventilation grille and slide it
to the required height. Tighten the screws to secure the grille in position.
If the unit is installed fully integrated, for kitchen plinth mounting, make sure that the ventilation
grilles in the plinth can dissipate at least 300 square centimetres so that the hot air can disperse
unhindered. Otherwise, the appliance has to work harder, which leads to an increase in
electricity consumption.
And also make sure that the door will open and close correctly at the chosen location.
NOTE: When pushing the appliance into the socket, make sure that the power cord is not trapped.
Pando
• PVMB 30-16
• PVMB 40-28
• PVMB 60-46CRR
• PVMBP 60-44
• PVMBP HD 40-25
• PVMBP HD 60-52
163
Pando Wine Cellar